rain

Laying a  ceramic  or  porcelain tile floor  can be considered a daunting task, but with adequate planning and preparation, this perception can be overcome. Laying one’s own  marble tile  is also much less expensive (and possibly more rewarding) than having it professionally installed. Cost can be minimized by careful planning and preparation. Laying the foundation. An unpleasant question to be faced is “What is your floor made up of?” Plywood is good. But, if you have the typical 1/2″ to 5/8″ particle board on top of a deck made of 2x8s, you have some work to do. After removal of the base trim, the particle board should be pulled up (this is easiest if you first cut it into about 16″ squares)and replaced by plywood. You will need a Skil saw, and if you’re doing the kitchen, you’ll need a “toe-kick saw.” Replace the particle board up to where the  tiles design  will stop. While you have the particle board off, you can inspect the deck to...

The  wood floor tiles  after cutting is cracked. After one years of decoration, after 8 months, it was found that no matter the living room or the bedroom, all the  marble floor tiles  that had been cut at the corner of the house were radially broken at the cutting point, and were increasingly serious. Strangely enough, the  flooring tiles  are not loose or tilted. Cracking of  tiles design  after cutting is a common phenomenon. Compared with the whole  tiles price , the overall strength of the cut  wall tiles  will be reduced a lot, so it will be easier to crack in the later stage. Although the  floor tiles design  are finished for a period of time after the cracking, but it is likely to be in the construction, after the completion of the inside has been small cracks, the naked eye can not find. In the process of paving, the workers use a rubber hammer on both sides of the  cement tiles ....

In the process of home decoration and  tiles  construction, the  floor tiles  are cleaned up with cotton and other objects after completion. The  marble floor tiles  are clean, with clear pattern, uniform color, uniform seams, straight edges, smooth and smooth joints, and no cracks, falling corners and missing edges. Flooring tiles  after 24 hours after the clearance of seams, before seams should first clean the gaps in the  floor tiles design , use special sealant seams; this is almost finished bathroom from near the wall tiles like a whole tile, almost can not see it is a lot of  tiles design  together. After the  wall tiles  are completed, all kinds of dirt on the wall should be cleaned and watered in advance a day. When the base is a new wall, when the cement mortar is 70% dry, the  cement tiles , the line and the  marble wall tiles  should be carried out. When encountering pipelines...